Blue Heron BMS-60 with Bluetooth
Made specifically for our Blue Heron Modular Batteries, 105Ah and 210Ah. This BMS comes with complete instructions for installation, and protective enclosure. High reliability, probably the best Lithium Battery BMS on the market. Maximum continuous current of 60 Amps. Other similar BMS on the market go for $250. Above is buy-direct/retail price.
This is a robust BMS, with highly sensitive monitoring devices, such as reading out to 1,000th of a Volt when using the Bluetooth feature. It shows the several dozen parameters monitored, critical values for alerts or automatic protective action, historical trends, cell-by-cell discrete monitoring, and the ability to adjust parameter limits if you wish to have more conservative values. The BMS comes with factory-set default values for your Blue Heron Modular batteries.
The Bluetooth feature is comprehensive, and allows discrete monitoring, setting of parameters if desired, and a quick visual representation of the state of your battery and each of its cells. This is an ideal backup to your installed battery monitoring devices, and aids in maintaining long life of your lithium cells. We provide a detailed installation procedure with your BMS.
The Protective Box may be mounted on the side of a battery, or on a nearby bulkhead. Note the negative cable from the BMS to the battery is relatively short - about 6 in. The protective box dimensions are 6-3/4 X 4-3/4 X 2-1/4.
(You are not able to use this BMS with our Blue Heron Drop-In batteries. Our Drop-In batteries come with an installed-BMS device with fixed settings.)
HIGH QUALITY Blue Heron BMS-60
This high-quality Blue Heron BMS-60 unit has an epoxy conformal coated circuit board to stand up to the rigors of the boating or RV environments. It is Bluetooth-equipped, allowing you to instantly see the status of the battery, and to adjust the factory default settings. You may want more conservative settings to ensure longer life of your battery, giving you the ultimate in operating flexibility and control. Low fees for ground shipping; contact Blue Heron Battery for quote on shipping fees.
This BMS board is solely for a 4S battery, that is one with 4 cells in series, rated at 12.8V. One BMS unit is required per battery. If for example you have 4 modular Bue Heron batteries in parallel, you would need 4 of these BMS Modules, each attached to its own battery. The BMS Board and its Protective Box need to be secured close to the negative terminal of the battery. One can use zip-ties to attach the Protective Box to the steel straps on the end of the battery. The Protective Box is not waterproof. We provide a plastic Protective Box to protect the BMS board and its connections from impact.
Here are some of the features of the BMS-60:
★★★★★